Clean Sampling Vehicle

Instructions:
1. Move the clean sampling car to the place to be sampled, fix the sampling car (brake), turn on the power, turn on the power switch, and turn on the fan switch;
2. The fan starts to work, and the voltage modulation is set to be domestic (220V). After the clean sampling car runs for 15 minutes, the sample is placed in the sampling barrel;
3. After sampling, remove the sample, turn off the fan and power supply, unplug the power cord, and move the sampling car to its original position.

INTRODUCTION

Working principle:

The clean sampling vehicle adopts vertical laminar airflow. The variable speed centrifugal fan presses the pre-filtered air from the negative pressure box into the static pressure box and then through the high efficiency filter for secondary filtration. The clean airflow from the air outlet of the high efficiency filter carries away dust and biological particles as it passes through the working area at a uniform cross-sectional air speed, thus creating a dust-free and sterile working environment.

Structure:

The clean sampling vehicle consists of a stainless steel or sprayed steel plate box. And the body consists of a pre-filter, a supply fan unit, a high efficiency filter, a lighting set, a diffuser plate, a combined electrical appliance, universal castors, etc.

Classification:

There are three types in general:

A type: made of integral steel or 304 stainless steel, with two-side glass and no plate below

B type: made of integral steel or 304 stainless steel, with two-side glass and a loading plate below

C type: made of integral steel or 304 stainless steel, with three-side board and a air shower below